Modifications to the aircraft carrier deck, the degree of rust, the carrier's overall alteration to what extent? ? ?

I truly personal experience, absolutely no false

Shot blasting machine uses Introduction

1, in addition to plastic runway

2, the steel surface treatment and rust than paint

3, Bridge Maintenance

4, floor surface treatment engineering based

5, Highway Maintenance Project

6, the municipal road maintenance works

7, the hull surface rust conservation

8, crossing clearance

9, storage tank maintenance rust than paint

10, such as maintenance of other surface treatment

On a level surface with shot blasting technology is the first to use the U.S. Navy, the purpose is to clear the deck of the aircraft remaining in the rubber printing. Promotion of the technology, making the airport and road maintenance methods played a great revolution, reducing skid and tire problems caused by water splashing accidents.

Shot technology contains 1 or more turbines by processing the surface of the jet beads of iron (diameter 1.7-2mm). In the jet, the clear surface of the soft part of the formation of extremely shallow irregular "orange peel" structure. Injection the bead and shot blasting machine and refuse to be connected to the vacuum aspiration, a special filtration system. iron beads will be automatically separated from the garbage, cleaning and return to the bead circle. waste separation to the output box. To ensure that micro- bead recycling, added a special high-powered vacuum cleaner (which is an integral part and machine) to parallel work and shot blasting machine.

Most of the round plastic are stacked in a sensitive area such as runway landing and take-off belt. The area is accident-prone areas, especially in rainy days, a number of reasons: accumulation of the runway surface, the accumulated rubber material to reduce or even eliminate the marking should be of the macro-or micro-slip, causing the surface of the tire skidding or aircraft were no gap.